BCM IN810EP, Руководство пользователя, Страница: 29 / 57

29
3.INSTALLATION
USB Select Jumper
USB Select Front USB Back USB
JP4
JP5
ON Unlock (JP7, 2-pin)
This Jumper for Flash BIOS. When you need flash BIOS will installed this Jumper.
CLR Power/CMOS (JP9, 3-pin)
This Jumper Choose for clear CMOS Setting you can clear password or all CMOS
Setting to Default.
SAFE Modem (JP10, 2-pin)
Usually socket 370 processors have locked frequency multiples. In this case, there is
no way to exceed the specified multiple whether through motherboard settings or BIOS
setup. With unlock socket 370 processors, exceeding the specified multiple is possible
through BIOS setup. Exceeding the specified multiple may result in hanging during
bootup. If this occurs, enable Sage Mode to force a multiple of 2 in order to enter
BIOS setup to correct the problem.
Chassis Intrusion (J29, 2-pin)
This leas is for a chassis designed for chassis intrusion detection. After-market toggle
switches may also be installed to the chassis panel or on any removable components.
Two wires should be available from the chassis to connect to this lead. When any
chassis component is removed, the contact should open and the motherboard will
record a chassis intrusion event. The event can then be processed by software such as
LDCM. If the chassis intrusion lead is not used, a jumper cap must be placed over the
pins to prevent unnecessary power loss.