MX945GM-D
5
Chapter 2
Hardware installation
2-1 Hardware installation Steps
Before starting the system, it is recommended to complete the following
steps:
1. Make sure mainrboard jumpers are set in proper position
2. Install CPU
3. Install CPU Heatsink (It is recommended to add proper amount of thermal compound between
the CPU Heatsink and CPU)
4. Install System Memory
5. Install Expansion cards (If there is any)
6. Connect IDE and Floppy cables, Front Panel /Back Panel cables
7. Connect ATX Power cables
8. Power-On and Load Optimal settings under BIOS
9. Save the BIOS setting and reboot
10. Install Operating System
11. Install device drivers and Utility
