background image

5

ENGLISH

FRANCAIS

SP

ANISH

DEUT

SCH

④  INPUT VOLTAGE

IMPORTANT: 

Before turning on your amplifier, check that you 

have positioned the voltage selector based on your geographic 

location: AC110V (USA, etc ...) and AC230V (EU, etc ...). 

Note:

  The  appropriate  fuse  is  the  same  (T10AL)  for  both  

voltages sectors.

Example position voltage selector: 

                  220V for Europe    

     110V for USA

Same fuse T10AL fo 230V and 110V

⑤ AC MAIN INPUT

Once all connections to the stereo system, plug the power cable 

into an outlet and turn the unit on. Your EX-332.2 is now ready 

for use.

⑥ OPTIONAL BOARD CARD

This slot allows you to add, when you want, one of the Optional 

cards for adding one more source, like a digital card that lets 

you listen to music from a computer.

⑦ LOUDSEPAKER TERMINALS

Connect the speaker to the terminals marked RIGHT "+ R" and 

"R -" ensuring that "R +" is connected to the "+" terminal of the 

enclosure and "R -" is connected to the terminal "- "the same 

enclosure. Connect the LEFT speaker to the terminals marked  

"L +" and "L -" by doing the same.

Make  sure  that  no  wires  are  not  insulated  can  bypass  the  

speaker outputs. Make sure that the speaker terminals are tight 

enough to ensure a good electrical connection. If the terminal 

screws are not tight enough, the sound quality may be affected.

Use only dedicated wire to the speaker (a section of 1.5 mm² or 

more is recommended especially if the cable length is greater 

than 3m).

Important Note: 

Check  the  impedance  of  your  speakers. 

When using a pair of speakers, you can use speakers with an  

impedance of between 4 and 8 ohms.

⑧ 

OPTION (RCA INPUT)

Without Optional card, this input works as a LINE input. If you 

use an Optional Card, this RCA input will be disabled in favor, for 

example, of the DAC card allowing you to listen to your music 

from your Smartphone or computer via USB slot. In that case, 

when  you  are  selecting  the  Option’s  source  button  (in  front  

panel),  you  can  listen  to  music  from  your  computer  or  

Smartphone (via usb cord).

Connections and uses

⑨ & ⑪ LINE 1 and LINE 2 (RCA INPUTS)

The LINE 1 and 2 inputs are for connecting a "line level" source 

to  your  amplifier.  It  is  designed  to  receive  an  "analog"  signal 

(as  opposed  to  "digital"  signal).  To  connect  your  source  we 

are using a traditional "RCA" cable, they are usually identified 

by a color code "RED" to the RIGHT and "WHITE" to the LEFT  

channel.

LINE 2 input has an option "AV BYPASS"

AV BYPASS (ON/OFF)

The LINE 2 input has an option "AV BYPASS" which takes you 

through the amplifier without using amplification part. This is 

very  useful  if  you  wants,  for  example,  connect  your  speakers 

directly on another AV amplifier output.

⑩ & ⑫ XLR CONNECTIONS

XLR connections (INPUTS ⑩

 

and ⑫

 

or OUTPUTS ⑲) allow 

the  use  of  symmetric  links.  This  type  of  cables  guarantees  

greater immunity to electromagnetic interference screw. Their 

use is recommended in particular when the distance between 

the devices is important.

⑬ INPUT LINE 3 (RCA input - Phono MM)

The LINE 3 input is for connecting a turntable. Most turntables 

have outputs in the "RCA" format but whose signal is not not 

compatible with the "line inputs" of the amplifiers.

In order to be able to use a turntable, it is necessary to use a 

compatible "phono preamplifier" with the used cell. 

The  EX-332.2  built-in  phono  preamplifier  is  compatible  with 

MM (Moving Magnet) cells.

⑭ MASS SOCKET 

For  connecting  your  turntable  do  not  forget  to  connect  the 

ground wire of your turntable to this ground screw in order to 

avoid the creation of noise issues.

⑮ PH BYPASS (ON/OFF) - LINE 3 input

The  Line  3  input  is  for  connecting  a  turntable  or  a  line  level 

  source.  Set  the  PH  BYPASS  to  ON  when  you  connect  your  

turntable and on OFF if you connect another source such as a 

CD player.

⑯ WIRELESS ANTENNA

This  connector  is  for  receiving  a  WIRELESS  antenna.  The 

supplied  antenna  is  mounted  directly  to  the  back  of 

the  unit.  The  WIRELESS  range  is  limited  to  few  meters  

(depending  on  the  nature  of  the  obstacles  located  between  

the EX-332.2’s antenna and your WIRELESS source).

It  is  possible  to  obtain  an  optional  "WIRELESS  long-range"          

antenna.  It  consists  of  a  cable  to  shifting  the  antenna.  

Moreover, this antenna is larger.

Содержание EX332.2













Отзывы: