7
ENGLISH
FRANCAIS
SP
ANISH
DEUT
SCH
Front panel - Connections and uses
④ DIRECT
If this function is activated (light signal active), then
the BASS and TREBLE functions are disabled. The
purpose of this function is to shut down the
electronic circuit’s tone control and balance in order to best
preserve the purity of the music signal.
⑤ BASS and TREBLE
The button "BASS" setting can act on the relative level of low
frequencies to alter the tonal balance of the sound to suit your room
acoustics and your tastes. The "TREBLE" button for meanwhile
high frequencies. When these buttons are in the middle
position, it means that the tonal balance is not changed. The
adjustable range is ± 5 dB.
+5 decibels knob turned in the direction of clockwise and
- 5 decibels knob turned anticlockwise.
Tone Controls: These functions only affects music
signals output from the speaker outputs and the LINE OUT
(RCA). They are not active on the REC output (for recording the
original signals).
⑥ VOLUME
This knob adjusts the output volume of the amplifier at the
speaker outputs.
⑦ SOURCE SELECTOR
These buttons select the active input of the amplifier
and the signal sent to the speakers, to headphones and
Preamp output and REC LINE. The buttons on the remote
control are identical to those buttons. Once the
selected button, the integrated LED corresponding
entry under the particular input button will turn white.
LINE 1, 2 and 3
(INPUTS): These buttons are used to select
sources present on XLR (balanced) and RCA inputs (line level)
with the same name located on the rear panel of the amplifier.
DAC - OPTIC & COAXIAL INPUTS: This button activates the
digital input on the back of the amplifier. It allows listening to
the digital source connected to the amplifier with the integrated
digital-to-analog converter.
Note: You can leave connect two sources (one on the Optical
input, and the other on the Coaxial input) and activate the one
that suits you the best by pressing the DAC button.
OPTION:
Without Optional card: This button selects the
listening to a 4th source you have connected to the RCA OPTION
connectors (rear panel).
With Optional card: This button allows you to select
the source to play on your option card. (See notice
of the said optioncard). Example of option card:
EX-DAC-U-3X, a DAC card allowing you to listen to your music
from your Smartphone and your computer thru an USB slot.
⑧ LINE 2 / AV BYPASS
The LINE 2 input has an option "AV BYPASS" which takes you
through the amplifier without using amplification part. This is
very useful if you wants, for example, connect your speakers
directly on another AV amplifier output.
⑨ LINE 3 / (RCA INPUT - Phono MM)
The LINE 3 input is for connecting a turntable. Most turntables
have RCA outputs format but whose signal is not compatible
with the "line inputs" of the amplifiers.
In order to be able to use a turntable, it is necessary to use a
compatible "phono preamplifier" with the used cell.
The EX-332.2 has a MM built-in Phono preamplifier on the
back of the device. Thus, if you do not use a turntable, set the
selector PH PHONO switch to OFF at the back of the unit to
connect a other source on this LINE 3 input, such as a CD player
(Line level).
⑩ WIRELESS ANTENNA
This connector is for receiving a WIRELESS antenna.
The supplied antenna is mounted directly to the back of the
unit. The WIRELESS range is limited to few meters (depending
on the nature of the obstacles located between the EX332.2’s
antenna and your WIRELESS source).
It is possible to obtain an optional "WIRELESS long-range"
antenna. It consists of a cable to shifting the antenna.
Moreover, this antenna is larger.
⑪ POWER - ON (I) / OFF (0) BUTTON
This switch allows shutdown or operation of the amplifier.
WIRELESS device playback
The EX-332.2 offers the possibility to listen wirelessly to music
played by WIRELESS devices like Smartphones. These devices
must be paired in order to communicate.
Note: You also need to run your other WIRELESS device to pair
to the EX-332.2.
PARING YOUR WIRELESS DEVICE
1 - On the front of the EX-332.2, repeatedly press the "INPUT"
button to select "WIRELESS" mode. Otherwise, press the button
DAC on the remote.
2 - Turn on WIRELESS communication on the other WIRELESS
device (your smartphone, tablet ...).
Your device should automatically receive the EX-332.2
WIRELESS signal.
3 - Select the device named "BC-EX332" on your WIRELESS
device to connect the stereo system.
If you have not managed to connect or see the EX-332.2 on the
screen of your device, you have to start pairing again (step 1).
Note: If another WIRELESS device had already managed to
connect the EX-332.2 will automatically try to reconnect to the
same device.
