SSS3416TCS
Owner’s Manual
9
AA
M6 x 15 Bolt
1 PC
BB
Spring washer
1 PC
CC
Flat washer
1 PC
AA
M6 x 15 Bolt
4 PCS
BB
Spring washer
4 PCS
CC
Flat washer
4 PCS
Step 6 (Tank baffle assembly)
a) Align the holes on the tank baffle (W) with the holes on the
left side panel.
b) Insert one M6 x 15 bolts (AA), one spring washer (BB) and
one flat washer (CC) into each pre-drilled holes
c) Tighten the bolts using the screwdriver provided.
Step 7 (Install doors )
a) Insert the pin on the bottom of left door (L) into the
pre-drilled hole on the left side of cart base (Q).
b) Push down the pin on the top of left door and insert it into
the pre-drilled hole on left front side of front beam (M).
c) Repeat the procedure with the right door (R) and front
beam (M).
d) Close the two doors.
Step 8 (Install the body assembly with cart
assembly)
a) Put the body assembly (A) onto the cart
assembly.
b) Align the holes on the body assembly with the
holes on the cart assembly
c) Insert the M6 x 15 bolt (AA), spring washer
(BB) and flat washer (CC) into pre-drilled holes,
and then tighten the bolts by hand.
d) Go back and tighten all the bolts using the
screwdriver provided.
