BASS TUBE (BAZOOKA
®
)
4.
Mount L-Brackets
(a)
On wheel well, slide L-brackets under
side garnish ensuring no wires are
pinched. Insert Ground ring between
front L-bracket and vehicle. DO NOT
TIGHTEN AT THIS POINT!
(Fig. 4-1)
NOTE: It may be necessary to unsnap
factory harness clip to align rear L-bracket.
5.
Route Wire Harness
(a)
Plug harness in at point shown. (Fig. 5-1)
(b)
Route Wire harness as shown. (Fig. 5-2)
(c)
Secure Wire harness at regular intervals
using 4” wire ties.
Fig. 4-1
Fig 5-1
(1)
Fig. 5-2
Southeast Toyota Distributors, LLC
Page 3 of 9