Page
8
Manage Users
Figure 12: Network Manage User
Network Port Configuration
Figure 13: Network Port Configuration
Add/delete users and change their passwords. Usernames and passwords are case sensitive and
alphanumeric.
The root user can not be removed
.
User Management Menu
To change user password or port access, enter number of user.
To add/delete user, select appropriate menu choice.
SNMP V3 requires passwords that are between 8 and 31 characters long
Enter request, CR to exit menus.
A)...Add user
1)...root
For network access, you must configure the IP addresses, Subnet Mask, and Gateway Address, or
enable the DHCP. The Changes must be saved and the module reset for network changes to take effect.
Network setup :
Ethernet Address................ 00:C0:48:00:01:FD
IP Address...................... 70.150.140.89
Subnet Mask..................... 255.255.255.224
Default Gateway................. 70.150.140.65
Connection Inactivity Timeout (mins): Disabled
Carriage Return Translation: Enabled
Break Length (msecs): 350
DHCP is Disabled Telnet is Enabled SSH is Enabled
SSH host keys are set to factory default
IPv4 Configuration................1
IPv6 Configuration................2
Inactivity Timeout................3
Carriage Return Translation.......4
Break Length......................5
DHCP Enable/Disable...............6
Telnet Enable/Disable.............7
SSH Enable/Disable................8
SSH Host Key Generation...........9
IP Filter Configuration...........10
SNMP Configuration................11
Web Server Configuration..........12
Exit..............................X,CR
Enter Request :
