Page
5
Figure 3: Outlet Password
Power Controller Configuration Menu:
To select the configuration menu, type
“config”
at the prompt.
Figure 4: Outlet Configuration
Manage User
Figure 5: Outlet Manage User
Add a User:
Assigned Outlets
MSP>password
Enter new Password: *****
Re-Enter new Password: *****
Type Help for a list of commands
MSP>
MSP>config
1)...Manage
Users
Add/Delete/Rename,
assign
outlets
2)...Change Outlet Name
Select an outlet to change its name
3)...Enable/Disable Confirmation
Confirmation
(Y/N)
4)...Enable/Disable Status Menu
Opening status of outlets
5)...Change Unit ID
As written
6)...Change Alarm Threshold
As written
7) Change Dispaly Orientation
Rotates display 180 degrees
X)...Exit
NOTE:
If the unit displays with the following message, “
Configuration mode in use
” A user in
the other port is in the “Configuration” menu.
The User Menu allows the admin user to add and delete users, change passwords, and change the outlet
list that displays a user’s access to prescribed outlets. Select “Manage Users,” from the configuration
menu and the following menu appears if the unit has been reset or initial setup:
-------------------------------------------
| User | Assigned Outlets |
| | C1,1| C1,2| C1,3| C1,4|
-------------------------------------------
-------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
C)...Change Circuit Group
Enter user number to assign Outlets, A, D, C or R.
Enter Request:
NOTE:
User in position (1) will be the ‘admin user’ for the outlets. Older units will not display
the ‘delete’ option until a user is added.
Select A), “Add user,” from the User Management Menu. Enter the name of the user to be added,
followed by <cr>.
Select a user number from the User Management Menu, the MSP unit will display the Assign Outlet
Menu:
NOTE:
User name is case sensitive.
