BayTech LASERSHARE PS-MIO, Руководство пользователя

Страница: 68 / 133

62
NOTE: [ BayTech ] will be highlighted only if an advertising BayTech
print server is highlighted in the "Print Servers" list.
This menu shows Print Server Name: and Current File Server: . You may
change the current file server by clicking on the symbol shown adjacent
to the Current File Server field or by typing ALT-C. The list of logged file
servers will appear. Highlight the desired file server and then press
<ENTER> or double click. The name of the selected print server will
appear in the
Print Server Name:
field. Additionally, this menu gives you
eight choices:
[Rename PrintServer ]
,
[Reset PrintServer ]
, [
Update Queue Info ]
,
[Update Mode Change]
,
[Queue Service Intv]
,
[Preferred Server ]
,
[ Factory ]
and
[ Exit ]
.
Section
7.6.7.1
describes
[Rename Print Server]
,
Section 7.6.7.2
describes
[Update Mode Change]
,
Section 7.6.7.3
describes
[Queue Service Intv]
, and
Section 7.6.7.4
describes
[Preferred Server]
.
NOTE: You must be logged in as a supervisor to have access to the
selections mentioned above.
The [Reset PrintServer ] selection will instruct the print server to do a
"hard" reset which will immediately reset the print server regardless of the
current state, the
[Update Queue Info ] selection will instruct the print
server to do a "soft" reset which will wait until all print jobs are complete
before performing a reset, the
[ Factory ] selection will reset all print
server parameters to factory default values (see Section 4.6 ), and the [
Exit ] selection will exit the "BayTech PrintServer Setup" menu
.
BAYTECH PRINTSERVER SETUP -
[ Rename PrintServer ]
The
[Rename PrintServer ]
selection in the "BayTech PrintServer Setup"
menu allows you to change the name of the print server. PSQMGR will
respond with the "Rename BayTech Printer Server" menu. Enter the
desired name for the print server and select
[ OK ]
.
NOTE: "BAYTECH" is an invalid name.