manualshive.com logo in svg

BayTech LASERSHARE PS-MIO, Руководство пользователя, Страница: 20 / 133

Поделиться
Скачать
BayTech LASERSHARE PS-MIO Скачать руководство пользователя страница 20

14

MSHELL is a memory resident program used for dial-out and dial-in
modem communication.  DIAL allows modem selection from a menu for
dial-out modem communication and is used to assign workstation IDs for
dial-in modem communication.  The MOPEN and MCLOSE programs are
used for dial-out modem communication to select a network modem and
disconnect from the modem respectively.  The operational functionality of
the software is discussed in 

Section 7

 and 

Section 8

.

 

POWER

NOTE:  This section does not pertain to the PS-MIO since this unit draws
its power from the LaserJet printer. If you are installing a PS-MIO, please
proceed to 

Section 4.5

.

IMPORTANT:  Do not power up your BayTech print server until all
external cables have been connected (see 

Section 5

).  If you will be using

PCONSOLE, do not power up the BayTech print server until after the unit
has been added to your network as a print server and the relevant print
queues assigned to it (see 

Section 6

).  If you will be using the BayTech

utilities (see 

Section 7

), you must power up the BayTech print server after

all external cables have been connected.

The PS-4A, PS-4C, and PS-4E models require external DC power.  The
external power supply provided with your print server supplies 9 VDC at 1
A.  To apply power, first plug the DC jack of the external power supply
into the 

POWER

 receptacle on the rear of the unit and then plug the AC

connector into an AC socket.  Next, position the on/off switch on the rear
panel to the 

ON

 position.  Power-on is indicated on the front panel by the

illuminating of a green LED.

WARNING:  Do not connect or disconnect the DC jack from the BayTech
print server while the AC connector is plugged into an AC socket.  Power
should be disconnected anytime cables are to be installed or removed. 
Make sure the power is disconnected before removing the cover and
attempting to make any internal changes such as changing the EPROM.

Содержание LASERSHARE PS-MIO






































































































































Отзывы:

Нет отзывов