manualshive.com logo in svg

BayTech DS Series, Руководство пользователя

Поделиться
Скачать
BayTech DS Series Скачать руководство пользователя страница 7

 

DS71-MD4 Serial host and 56k Modem 

7 

•

 

Connect the Host Module’s EIA-232 port to the adapter via the 

RJ08X007 

rolled flat ribbon 

cable.  

•

 

Default configuration is 

9600 bps, 8 data bits, 1 stop bit and no parity

. 

 

NOTE:

  At any time during the session you need to go to another menu, use the 

Attention 

Character = semi-colon (;)

.  Press the attention character key 5 consecutive times to get back to the 

main status menu.  

 

NOTE:

 Depending on the DS-Series model, the menus will vary according to the number of DS74 

modules installed in the unit. If this is not an initial set-up and Password has already been enabled, 
you are prompted to login. After logging in successfully, invoke the main menu by sending the 
attention character five times (

;;;;;

). 

 

NOTE:

 Password feature is case sensitive. (Default is user/password is 

root/baytech

) 

 

Main Menu 

The following Header and Menu appears or similar: 

 
Figure 1 

 

 

Select option ‘C’ for the configuration menu. Select the DS71-MD4 module option and the following 
menu is displayed: 

 

Data Switch Series - F.1.04.00
Bay Technical Associates 
Unit ID: DS71-MD4 
Attention Character: ; 
      Module 1: admin      on Host EIA-232 
      Device A         (3,1).................1 
      Device B         (3,2).................2 
      Device C         (3,3).................3 
      Device D         (3,4).................4 
      DS-RPC           (5,1).................5 
      Configuration .........................C 
      I/O Modules Reset .....................RM 
      Unit Reset ............................RU 
      Exit ..................................X 
      Logout ................................T 
Enter Request : 

Содержание DS Series






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды