background image

 

DS71-MD4 Serial host and 56k Modem 

15 

  

Installed Modules :2,3,5 
Port Select Code ......................$BT 
Attention Character ...................; 
Disconnect Time Guard .................Disabled 
Port ID Echo ..........................Disabled 
Unit ID ...............................DS71-MD4 

 

Local Modem Option: 
Rings to Auto-Answer................... 2 
Modem Connectivity Timeout.............60 minutes 
Modem Inactivity Timeout...............60 minutes 

 

Login Setup: 
Header Text ...........................Enabled 
Menu Mode .............................Enabled 

 

Auto Connect Module & Port 
+----+------------+------+----------+ 
|User|    Name    | M: P |  Auto    | 
+----+------------+------+----------+ 
|  1 | admin      | 1: 1 | Disabled | 
+----+------------+------+----------+ 

 

Assigned User Ports: 
+----+----------* +-M3-+-M4-+-M5-+ 
|User|    Name   \|1234|1234|1234| 
+----+------------*----+----+----+ 
|  1 | admin      |1234|1234|1234| 
+----+------------*----+----+----+ 

 

User Dialback Phone number 
+----+-----------+-----------------+----------+ 
|User|   Name    |  Phone number   | Dialback | 
+----+-----------+-----------------+----------+ 
|  1 | admin     |                 | Disabled | 
+----+-----------+-----------------+----------+ 
Dialback Delay.........................10 seconds 

 

Access Control: 
Serial Port access: 
1)...Prompt for User Name: Disabled 
2)...Prompt for Password : Disabled 
Modem Port access: 
3)...Prompt for User Name: Disabled 
4)...Prompt for Password : Disabled 

 

Auto Connect Module & Port 
+----+------------+------+----------+ 
|User|    Name    | M: P |  Auto    | 
+----+------------+------+----------+ 
|  1 | admin      | 1: 1 | Disabled | 
+----+------------+------+----------+ 

 

+----+----------------+-------+------+------+------+----+----+----+----+ 
|Port|      Port      |  Baud | Word | Stop |Parity|Xon/ Xoff|LineDrive| 
|    |      Name      |  Rate | Size | Bits |      |Xmit|Recv|DTR |RTS | 
+----+----------------+-------+------+------+------+----+----+----+----+ 
|  1 |Host EIA-232    |  9600 |   8  |   1  | None | Off| Off|High|High| 
|  2 |Host V90 Modem  | 115.2k|   8  |   1  | None | Off| Off|High|High| 
+----+----------------+-------+------+------+------+----+----+----+----+

Содержание DS Series






























Отзывы: