Page
4
COMPLIANCE
STANDARD
CONNECTION
DESCRIPTION
EIA-232 Serial Connection
ATS CPU
BayTech units are in accordance with the general requirements of
Standard for Information
Technology Equipment
(ETL listed, conforms to ANSI/UL 60950-1 2
nd
Edition and CAN/CSA C22.2
No. 60950-00. CE conforms to IEC 60950.)
Equipment installations are to be in accordance with the
Canadian Electrical Code, Part I, CSA C22.1-02; General Requirements – Canadian Electrical, Part
II, CSA C22.2 No 0-M91; the National Electrical Code, NFPA 70-2005; and the National Electrical
Safety Code, NFPA, IEEE C2-2002.
We welcome any comments you may have about our products, and we hope that you will continue to
look to BayTech for your remote management needs.
BayTech's Modular Series unit provides a Serial EIA232 interface that controls user access and outlet
controls to the power strip.
CAUTION:
All power should be removed from the BayTech unit prior to removing or installing
cables and /or adapters.
ATTENTION:
Tout pouvoir doit être retiré de l'unité BayTech avant de retirer ou d'installer des
câbles et / ou des adaptateurs
The Module has an RJ-45 port which uses an 8-pin crossed modular cable to connect to a local EIA-
232 device such as a computer terminal or external modem. Most serial computers do not have RJ-45
connections; therefore an adapter is provided with this unit to convert from a DE-9 connector to an RJ-
45 connector (Bay Tech Part No. 9FRJ45PC-4). An adapter to convert from a DB-25 connector to an
RJ-45 connector is also available from Bay Tech, upon request (Bay Tech Part No. 25FRJ45PC-4).
The 8-pin crossed modular cable is configured to operate with these adapters.
NOTE:
Custom cables are available to connect a device to this unit’s serial port. These custom
cables are one-way cables labeled with Baytech on one end and a device name on the other end.
REMARQUE:
les câbles sur mesure sont disponibles pour connecter un périphérique au port
série de cet appareil. Ces câbles sont des câbles de commande à sens unique marqué par
Baytech à une extrémité et un nom de périphérique à l'autre extrémité.
Units built after 2010, have Atmel Flash CPUs installed. The internal processer can be upgraded via
the EIA232 Serial port. The user will need to download the AVRProg.exe program from
www.avrfreaks.net
or use internet search engine. Contact Baytech Support for the latest ATS firmware
file and upload instructions.
