2
MANUFACTURER: Bayside Furnishings
®
CATALOG: 3-in-1
TM
TV Stand (PT3N1C-46-N)
MADE IN CHINA
1.
Please read the assembly instructions prior to assembling this product.
2.
Remove all hardware from the box and sort by size.
3.
Check to see that all hardware and parts are present BEFORE assembling.
4.
Ask a friend to assist you with the assembly of this furniture.
5.
To avoid damage, assemble the product on a sturdy, level and protective surface.
6.
Please wait until all steps are completed before fully tightening bolts.
7.
Make sure all bolts are tightly fastened before the unit is used.
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S
FITS UP TO MOST 132 cm / 52 in FLAT
PANEL TVs
MAXIMUM LOAD 61.3 kg / 135 lb
FITS UP TO MOST 132 cm / 52 in FLAT
PANEL TVs WITHOUT SWIVELING BRACKET
MAXIMUM LOAD 61.3 kg / 135 lb
G E N E R A L I N F O R M A T I O N , T I P S a n d T R I C K S
This product is sold with one set of Tipping Restraint Hardware Kit. You must install the Tipping
Restraint Hardware between the wall and the TV console to prevent any accidents or damages. When
properly installed, this restraint can provide protection against the unexpected tipping of the unit due to
small tremors, bumps or climbing. The restraint is only a deterrent and is not a substitute for proper
adult supervision. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
MAXIMUM LOAD 22.7 kg / 50 lb
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT
PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS.
NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT. TO
AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTER OF THE UNIT; THE BASE OF THE
TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE UNIT WITHOUT
OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS
INCLUDING OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS
COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.
