Baynhams PeRSo 3.0, Руководство пользователя

Страница: 3 / 18

The manufacturer is not responsible for injury due to the following
incorrect use or incorrect choice of equipment.
Warning:
This respirator device should be used by trained personal and qualified personnel only.
Before using the devices ensure you have understood that at very high work rates the
pressure in the device may become negative at peak inhalation flow.
Before and during using the device, attention shall be drawn to possible incorrect use
and, where appropriate, the possibility of looped hoses and/or cables becoming
entangled.
Before or during use of the device, if the device is in the power-off state no respiratory
protection is to be expected.
Please leave the work place and remove the headgear, when the device is in the power-
off state a rapid build-up of carbon dioxide and depletion of oxygen within the hood may
occur.
The filters shall only be fitted to the blower unit and not directly to the helmet/hood.
The user should not confuse the markings on a filter relating to any standard other than
EN 12941 with the classification of this device when used with this filter.
DO NOT use PERSO 3.0 with the blower unit switched off.
DO NOT use PERSO 3.0 in an atmosphere that is immediately hazardous to user
hygiene or health and/or has oxygen content of less than 19.5% or contains unknown
substances.
DO NOT use PERSO 3.0 in an explosive atmosphere.
DO NOT use PERSO 3.0 in confined spaces or areas of poor ventilation
DO NOT use PERSO 3.0 in high winds.
DO NOT alter or modify in any way.
DO NOT touch any of the moving parts.
DO NOT allow water or other liquids to enter the impeller chamber, the filter or battery
compartment.