5
REFERENCE SYMBOLS
Pinch point
Keep hands away from pinch points.
Hand crush - moving parts
Alerts crushing is possible.
Rotating shaft
Do not wear loose clothing around turning
parts.
Lifting
Requires two people to safely lift an item.
Tip
Calls attention to special information.
Parts
Required parts for installation
and maintenance.
Use guards
Keep guards in place. Do not remove during
operation.
Example
Provides a problem or exercise that
illustrates a method or principle.
Center of gravity
Indicates the center of gravity of the machine
to help assist when rigging and lifting.
Lift points
Requires the use of proper rigging and lifting
techniques based on the lift plan.
Note
Emphasizes general information worthy of
attention.
Tools
Required tools for installation
and maintenance.
Disconnect
Disconnect to de-energize before opening.
Symbols and signal words are used to identify the
level of hazard and help avoid personal injury.
Note: Safety signs and labels conform to the requirements of ANSI
Z535.4 or ISO 3864.
Warning
Alerts that a hazard may cause serious
injury or death.
Caution
Alerts that a hazard may cause minor or
moderate injury
.
!
!
!
Shock Hazard
Alerts that dangerous voltage may be
present
.
