Bayer HealthCare Certegra Скачать руководство пользователя страница 32

Страница: 32 / 104

MEDRAD

Stellant CT Injection System with Certegra

Workstation

6 - 24

6.2 Injector Head Components

6.2.1 Syringe Heat Maintainer

It is recommended that contrast be at 35 degrees Celsius prior to loading it into the syringe. Once the
syringe is loaded, use the syringe heat maintainer to maintain the contrast temperature.

Syringe B

Saline syringe

Heat Maintainer
(Side A or B)

Refer to

"Syringe Heat Maintainer"

for more information.

Volume
(Side A or B)

•

Syringe Installed

- Indicates the volume loaded in the

syringe.

•

Auto Load Active

- Indicates the volume to be loaded

into the syringe.

•

Syringe not Present

- No indicator.

Auto Load

Activates the Fill A, Fill B, and the +/- buttons.

Fill A

Fills syringe A to the displayed volume.

Fill B

Fills syringe B to the displayed volume.

+/-
(Side A or Side B)

Adjusts the Auto Load volume to the nearest multiple of 5 mL, and
then in increments/decrements of 5 mL.

Prime

Activates the tube priming function.

Move Piston

Activates the forward and reverse piston controls. Times out after
ten seconds of inactivity.

Piston Control
(Side A or B)

Advances and retracts the piston (variable speed).

Check for Air

Reminds user to verify that air is purged from the syringe and
tubing. (Must be lit to enable arming.)

Protocol Lock

Indicates the protocol lock on display is enabled. (Must be lit to
enable arming.)

Arm

Arms the system.

Abort

Terminates and disarms the injection.

Start/Hold

Initiates injection.
Holds injection for a maximum of 20 minutes.

Arm Lights

Refer to

"Arm Lights"

for more information.

Manual Knob

(Side A or B)

Permits an operator to manually move the piston when the injector
is not armed.

Name

Description

Mechanical Hazard - Minor or moderate patient and/or worker injury may result.

•

Do not use the syringe heat maintainer if the fault indicator light is illuminated.

CAUTION

Содержание Certegra









































































































Результаты поиска

Содержание Certegra

Отзывы:

Похожие инструкции для Certegra

Бренды по названию

Популярные бренды

Bayer HealthCare Certegra, Руководство по эксплуатации

Результаты поиска

Содержание Certegra

Отзывы:

Похожие инструкции для Certegra

Бренды по названию

Популярные бренды