Bayer HealthCare Certegra Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 104

background image

MEDRAD

®

Stellant CT Injection System with Certegra

®

Workstation

4 - 16

4.4 Programming Mode

After values for any two parameters are entered, the system calculates the value for the third. By
default, values for flow rate and volume are entered, and the system calculates duration. Programming
Mode is used to toggle the value calculated by the system. The system can calculate the flow rate, vol-
ume, or duration. To enable Programming Mode, refer to

"Fluid Delivery Setup"

for more information.

4.5 Basic Informatics

If an optional Informatics platform is included with the system, refer to the Certegra

®

Applications and

Workstation Accessories manual for overview and functionality.

4.6 Using the Pedestal with Integrated IV Pole

The pedestal is intended to support the injector head in a CT scan room. Do not attempt to use the ped-
estal for any other purpose.

4.6.1 Pedestal Operating Instructions

•

To extend Integrated IV Pole:

Turn adjustment knob counter-clockwise to loosen, then raise

the top of the Integrated IV Pole to the desired height.

•

To lock the Integrated IV Pole:

Turn the adjustment knob clockwise until tight. Do not

overtighten.

•

To store:

Turn the adjustment knob counter-clockwise and retract the Integrated IV Pole.

Mechanical Hazard - Minor or moderate patient and/or worker injury may result.

•

Tighten all screws, clamps, and knobs during assembly and as needed during use. Loose
components may cause the pedestal to collapse.

•

Do not move or manipulate the injector mount by pulling or pushing the integrated IV pole.
Using the pole to maneuver the injector could bend the pole or cause an imbalance of the
system. Maneuver the injector as recommended. Refer to

"Moving the System Within the

•

Do not adjust the integrated IV pole or move the injector when anything is hung from the
pole.

•

Use care and diligence in folding and unfolding the hooks, raising and lowering the pole,
and tightening the adjustment knob. Keep hands and fingers clear of all pinch point areas.

•

The folding hooks are designed to hold a maximum weight of 5 lbs / 2,265 grams each.
Do not exceed the weight limits.

•

Use extreme care in raising and lowering the integrated IV pole. The pole should raise and
lower easily without force. If raising and lowering becomes difficult, clean the pole as
described in

"Cleaning the Pedestal With Integrated IV Pole, Overhead Counterpoise

System (OCS), and Base"

.

Electric Shock Hazard - Minor or moderate patient and/or worker injury may result.

•

Only plug the system into a direct mains access point. Do not plug the system’s power
cord into an extension cord or multi-outlet power strip.

Procedure Delay Hazard - Serious patient and/or worker injury or death may result.

•

Turn off any equipment that could generate a high level electrostatic discharge.

CAUTION

«
...
22
23
24
25
26
...
»

Содержание Certegra









































































































Отзывы:

Нет отзывов

Похожие инструкции для Certegra

Бренд: YATEK Страницы: 72

Бренд: Barreto Страницы: 20

Бренд: Barreto Страницы: 18

Бренд: Backyard Discovery Страницы: 41

Бренд: NANLUX Страницы: 39

Бренд: OceanSat Страницы: 85

Бренд: ParaBody Страницы: 3

Бренд: Hach Страницы: 52

Бренд: hager Страницы: 2

i-Digits Access

Бренд: Össur Страницы: 231

Бренд: U-Line Страницы: 6

Бренд: ebm-papst Страницы: 10

CEAG Exit Cube 33822 LED CGLine+

Бренд: Eaton Страницы: 20

Бренд: swamp Страницы: 5

Бренд: Erbe Страницы: 154

Бренд: Becker-Elektronik Страницы: 24

Бренд: Murphy Страницы: 20

Бренд: REITEL Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды