Bayby BBW 2030, Руководство пользователя

Страница: 12 / 20

4-in-1 Multifunction Baby Bottle Warmer
EN
12
Note:
The time necessary for warming up the milk depends on the amount of milk being
warmed up and its initial temperature, for example room temperature (20 °C) or the
temperature after being removed from a refrigerator (5 °C) .
■
Due to the possible consistencies of baby food, the values provided above are only
indicative in nature .
■
In the event that you find that the baby food is not heated sufficiently, restart the
warming cycle and next time you may add a little more water into the body of the
appliance A
3
.
■
If on the other hand you find that at the end of the warming cycle that the baby food is
too hot, allow the food to cool down to the required temperature, check it by tapping
it against your wrist and next time you can pour a little less water into the heating
tank A
2
.
!
Attention:
The steam that is released during the warming process is hot . Always
keep your hands away from the bottle warmer during the warming
process . Be careful of the higher temperature when removing the lid .
If you wish to turn the bottle warmer off at any time, press button B
1
to the OFF
function and disconnect the power cord plug from the power socket .
Sterilisation
■
Pour 40 ml of water into the body of the appliance A
2
.
■
Place the baby bottle attachment A
3
into the body of the appliance A
2
(figure E
1
)
and put the baby bottle without the nipple, screw ring or lid into it upside down (figure
E
2
) .
■
Cover the bottle warmer with the lid A
1
, (figure E
3
) . Check that the lid A
1
has
properly adhered to the body of the appliance A
2
.
■
Start the sterilisation function by pressing the On/Off button of the appliance B
1
and
subsequently selecting the sterilisation function B
2
and C
7
. The LCD display shows
the preset time of 10 minutes .
The sterilisation can be decreased or increased using buttons B
3
, B
4
. After three
seconds, if no other functions are set, the bottle warmer will start the sterilisation
function and a countdown will be shown on the LCD display .
■
After the sterilisation function has finished, the bottle warmer will make a sound .
■ Turn off the appliance and disconnect it from the power socket .
■ Allow the bottle warmer to cool down before using it again . The sterilisation function
can be repeated after 20 minutes .