Bayby BBW 2030, Руководство пользователя

Страница: 10 / 20

4-in-1 Multifunction Baby Bottle Warmer
EN
10
Operation
!
Attention:
Never use the bottle warmer without water in the heating tank!
Stand the bottle warmer on a horizontal and stable surface .
The steam that is released during the warming process is hot . Always keep your
hands away from the bottle warmer during the warming process .
Warming up baby bottles
■
Put the baby bottle attachment A
3
into the body of the appliance A
2
and then put
the baby bottle bottle into it (figure D
1
) .
■
Pour the corresponding amount of water into the body of the appliance A
2
using the
measuring cup A
1
(figure D
2
) . The amount of water should be equal to the
amount of milk in the baby bottle.
Always place a fully assembled baby bottle into the bottle warmer including its screw
top and nipple (without the dust cap) . Make certain that you pour water into the
bottle warmer before turning it on . Never allow water to rise above the neck of the
bottle or to spill over the edge of the bottle warmer . The water must not exceed the
"MAX" level marked inside the body of the appliance .
■
Cover the bottle warmer with the lid A
1
, (figure D
3
) . Check that the lid A
1
has
properly adhered to the body of the appliance A
2
.
■
Start the bottle warming function by pressing the On/Off button of the appliance B
1
and subsequently selecting the baby bottle warming function B
2
and C
6
. The LCD
display shows the preset time of 3 minutes .
The warming time can be decreased or increased using buttons B
3
, B
4
. After three
seconds, if no other functions are set, the bottle warmer will start the warming function
and a countdown will be shown on the LCD display .
■ When the bottle warming process is complete, the bottle warmer will make a sound
and the LCD display will show the temperature of the warmed milk C
4
.
■
Turn off the appliance and disconnect it from the power socket .
■
To remove items from the bottle warmer, use the tongs A
6
, which are a part of the
product .
■
Always test the food once it reaches the desired temperature, immediately remove it
from the bottle warmer .
Shake the baby food or milk after taking it out of the bottle warmer . Check the
temperature of the food or milk by dripping a little on your wrist .
■ Allow the bottle warmer to cool down before using it again . The bottle warming
function can be repeated after 30 minutes .