Bayby BBM 7010, Руководство пользователя

Страница: 11 / 20

11
Digital Audio Baby Monitor EN
Installation location of the baby unit and parent unit
1. Baby unit
■
Locate the baby unit A
2
within reach of a power socket on an even, dry and stable surface in the room
where you want to monitor your child. We recommend an elevated location (e.g. chest of drawers or a shelf)
at a suffi cient distance away from equipment and devices that could cause signal interference.
■
The baby unit A
2
should be located at least 1 m away from your child to minimise the effects of electro-
smog.
Attention:
Never locate the baby unit A
2
or the power adapter A
3
in the baby's bed or within the reach of your
child.
2. Parent unit
■
Put the parent unit A
1
in the room where you will be located. When the parent unit A
1
is to be powered
from the grid, locate it within reach of a power socket.
Power source
1. Baby unit
■
External power source and its use
– For powering the baby unit A
2
, use only the original power adapter A
3
model number
RJ-AS060450E002 (input 6 V , 450 mA).
– Insert the connector of the power adapter A
3
into the socket B
5
that is located at the rear of the
baby unit A
2
. Insert the plug of the power adapter A
3
into a power socket.
2. Parent unit
■
External power source and its use
– For powering the parent unit, use only the original power adapter A
3
model number
RJ-AS060450E002 (input 6 V , 450 mA).
– Insert the connector of the power adapter A
3
into the socket C
qa
that is located at the bottom of the
parent unit A
1
. Insert the plug of the power adapter A
3
into a power socket.