13
N15- RESTORE FACTORY SETTINGS
Press and hold the “SELECT” button until the display reads “dE”.
All game settings will be restored to their factory defaults, which are
highlighted in this manual.
N13- DIAGNOSTICS
The diagnostics mode will help you troubleshoot problems and allow you to determine if all inputs are
working correctly.
The display will show “-” when no inputs or switches are activated.
Once one or more inputs are activated, their symbols alternate on the display (see the chart below).
Scoring Sensor (hoop)
1
*Ball Gate Open
b
*Ball Gate Closed
r
Tickets Low
Lo (closed)
“.” (open)
Game Start Button
o
Coin Switch
C
*Note: both Gate Open and Gate Closed sensors are
closed
when gate is closed.
N14- BALL GATE MECH TEST
While in the Ball Gate Test mode, pressing the SELECT button turns the motor to the next location.
The current gate position is shown on the displays.
The motor will time out if the sensor is not reading movement.
GATE MOTOR POSITION
LEFT DISPLAY
RIGHT DISPLAY
X
(Gate Open
Sensor)
Y
(Gate Closed
Sensor)
Gate is Open
OP
0
1
Gate is Closed
CL
0
0
Gate is Moving
1
1
