Bay Tek Games SINK IT SHOOTOUT!, Руководство по обслуживанию

Страница: 33 / 50

33
TROUBLESHOOTING GUIDE
9
Problem Probable Cause Remedy
Meter does not work.
Credit meter will click as each
coin is inserted.
Disconnected, loose or broken
wires.
Faulty counter.
Check connections and reseat J25 on Minigen
board. Cables # AACE3315and AACE3317
Replace counter. AACE3317
Check Minigen Comm
Error
Game does not coin up
but credit meter clicks.
If “Power” is not solid ON
Ensure AACE3309 cable is
plugged into blue “IN” socket
on main board. (J16)
Replace if needed.
Replace Serial Interface board.
(AACB2204)
If “TX” & “RX” are not blinking very fast
Communication to Motherboard faulty.
Check AACE3314 to motherboard.
Check or replace adaptor (A5CN1031)
Main Board and wiring to coin switch OK.
Check green LED’s on Serial Interface board.
Is “Power” solid ON?
Is “TX” & “RX” blinking very fast?
Game not coining up.
Note:
If game is equipped with 2 Bill Accep-
tors, they both share the signal line to
Mini Gen Board to Connector J9
Enter Diagnostic Menu to see if
Coin input goes to ON quickly
when coin is inserted.
Look for “Check Minigen
Comm” error on screen.
Ensure game makes sound
when coin switch is triggered.
Game set to large amount of
credits per game.
Refer to “Check Minigen Comm” error
diagnostic section.
Check coin switches—both should be wired
normally open. If one switch is “closed” the
other will not work either.
Check wiring to Mini Gen Board.
(AACBL4A-DOOR, AACE3316, AACE3311)
Check Game Setup Menu. Ensure Coins/
Credits per Game is set. Default = 4.