Bay Tek Games Big Bass Wheel, Руководство по обслуживанию

Страница: 53 / 74

TROUBLESHOOTING GUIDE
TROUBLESHOOTING GUIDE-SCORING ISSUES
TROUBLESHOOTING GUIDE
PROBLEM PROBABLE CAUSE REMEDY
SOLENOID ALWAYS
STAYS ON.
PLAYERS CAN SPIN THE
WHEEL WITHOUT
COINING UP.
DURING ATTRACT MODE
THE GAME MAKES A
LOUD CLICKING SOUNDS
AS THE WHEEL SPINS.
A. JAMMED SOLENOID.
B. MISSING OR BROKEN SPRINGS.
C. PINCHED CABLE.
D. FAULTY I/O BOARD.
A. INSPECT SOLENOID, ENSURE IT WORKS
PROPERLY.
B. LOOK FOR MISSING SPRINGS. REPLACE
ASSEMBLY IF NEEDED (AASO1450).
C. INSPECT PHONE CABLES.
D. REPLACE I/O BOARD (AACB1900).
PHYSICAL METERS DO
NOT WORK.
A. TICKET METER SHOULD "CLICK" AS
TICKETS ARE BEING DISPENSED.
B. GAMES METER SHOULD "CLICK" AS
GAMES ARE STARTED.
C. FAULTY I/O BOARD.
A. WATCH AS THE TICKETS DISPENSE,
REPLACE COUNTERS IF NEEDED (AACO1000).
B. WATCH AS THE NEXT GAME STARTS,
REPLACE COUNTERS IF NEEDED (AACO1000).
C. REPLACE I/O BOARD (AACB1900).
MONITOR SHOWS
"OUT OF ORDER-DOOR
OPEN".
A. ONE OR MORE OF THE DOORS ARE
OPEN.
B. FAULTY DOOR LIMIT SWITCH.
C. I/O SERIAL CABLE UNPLUGGED.
D. FAULTY I/O BOARD.
A. REFER TO THE "DOOR OPEN" SECTION.
B. REPLACE THE LIMIT SWITCH (A5SW7000).
C. INSPECT AND RE-SEAT SERIAL CABLE
FROM THE MOTHERBOARD TO THE I/O BOARD.
D. REPLACE I/O BOARD (AACB1900).
MOTOR WATCHDOG
ERROR.
A. ENCODER SENSOR FAULTY.
B. FAULTY MOTOR.
A. CLEAN ENCODER SENSOR ON THE LEFT
SIDE OF THE WHEEL.
B. REFER TO THE "MOTOR WILL NOT ASSIST"
SECTION ON PAGE 50.
AFTER THE PROBLEM IS FOUND AND FIXED:
1. ENTER THE OPERATOR MENU AND
ENSURE THE PLAYER TIME OUT IS SET TO
"MOTOR ASSIST".
2. TURN GAME OFF, THEN BACK ON, COIN UP
BUT DO NOT SPIN THE WHEEL.
LET THE GAME SPIN WHEEL.
3. ENTER THE MENU AND VERIFY THE
"MOTOR WATCHDOG" ERROR IS NOT
PRESENT.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 53