Bay Tek Games Big Bass Wheel, Руководство по обслуживанию

Страница: 43 / 74

TROUBLESHOOTING GUIDE
TROUBLESHOOTING STRATEGY
USE A SYSTEMATIC METHOD OF TROUBLESHOOTING TO DETERMINE THE
EXACT PROBLEM, PROBABLE CAUSE, AND REMEDY. USE THE PROCESS OF
ELIMINATION TO FIND THE FAULTY COMPONENT. ALWAYS CHECK FOR THE
SIMPLE AND OBVIOUS CAUSES FIRST SUCH AS UNPLUGGED, LOOSE OR
BROKEN WIRES, BAD SENSORS, BENT, PINCHED, STUCK, OR JAMMED
COMPONENTS.
PROBLEM PROBABLE CAUSE REMEDY
NO POWER TO THE
GAME.
NO LIGHTS ON AT ALL.
A. GAME IS UNPLUGGED
B. CIRCUIT BREAKER TRIPPED
C. POWER STRIP FAULTY
D. FAULTY CABLE/POWER SUPPLY
A. CHECK THE WALL OUTLET
B. RESET THE POWER STRIP BREAKER
SWITCH OR BUILDING CIRCUIT BREAKER
C. CHANGE THE PLUG POSITION, REPLACE IF
NEEDED.
D. SEE "POWER SUPPLY DIAGNOSTIC"
SECTION, PAGE 62.
NO AUDIO
A. VOLUME TOO LOW
B. LOOSE WIRE
C. FAULTY I/O BOARD
D. FAULTY MOTHER BOARD
A. FOLLOW THE DIRECTIONS ON PAGE 21 TO
ADJUST THE VOLUME.
B. CHECK THE AUDIO CABLE (AACEAU010)
CONNECTIONS FROM THE
I/O BOARD TO THE MOTHER BOARD,
SEE BELOW.
C. REPLACE THE I/O BOARD (AACB1900).
D. REPLACE THE MOTHER BOARD (AAMB6).
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 43