Bay Tek Games Big Bass Wheel, Руководство по обслуживанию

Страница: 12 / 74

SERVICE CONNECTIONS / POWER REQUIREMENTS
All Bay Tek games are 110V unless specifically ordered 220V.
The game will draw 2-3 AMPS at start up.
Outlets should be rated for 20 AMPS or higher.
The game voltage can be found on the serial number decal, see below.
ATTENTION
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer or
its service agent.
ATTENTION
Always plug this game into a grounded circuit.
ATTENTION
Be sure the electrical power matches the game
requirements. See the serial number decal located on the
back of the game cabinet.
SUITABLE FOR INDOOR USE ONLY
Model: AAGM-1234
Software Version: 5-678
Game Serial Number: 9-1234
PCB Serial Number: 567,789
Manufacture Date: 7/07/2007
Inspected By: R.S.
GAME
VOLTAGE
WILL BE HERE
AMUSEMENT
MACHINE
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 12