Bay Networks Bay Dial VPN, Руководство по настройке и устранению неисправностей

Страница: 77 / 186

Configuring TMS for an erpcd-based Network
115623B Rev. 00 BayStream Multiservice Software Version 7.2 5-9
saddr= secondary_dynamic_address
_assignment_server_addr
Specifies the IP address of the
secondary dynamic address assignment
server. You must not specify a
secondary server without specifying a
primary server. Optional for add and
modify. Not used for other
commands.
authp= authentication_protocol Specifies the authentication protocol
used between the gateway and the
authentication server. For remote
authentication, this value must be
radius. For local authentication, this
value can be acp. Required for add and
modify. Not used for other
commands.
acctp= accounting_protocol
Specifies the accounting protocol used
between the gateway and the
accounting server. The only valid value
is radius. Specify none to disable
accounting.
If you specify this protocol, you must
also specify a primary server.
Required for add and
modify. Not used for other
commands.
addrp= dynamic_address_allocation
_protocol
Specifies the dynamic address
allocation protocol used between the
gateway and the dynamic address
allocation server. Specify DHCP to
enable dynamic allocation or none to
disable it.
If you specify this protocol, you must
also specify a primary server.
Required for add and
modify. Not used for other
commands.
(continued)
Table 5-2. tms_dbm Command Arguments
(continued)
Argument Function
Used with These
Commands