Bay Networks Bay Dial VPN, Руководство по настройке и устранению неисправностей

Страница: 101 / 186

Configuring IPX as the Routing Protocol
115623B Rev. 00 BayStream Multiservice Software Version 7.2 8-5
To enable IPX, you must enter this software option key, then reboot the NAS to
activate the newly entered key. Software option keys cannot be activated with the
reset command.
The annex show port ppp command shows several configuration parameters on
one screen. Make sure that the ppp_ncp parameter is set to all or IPCP and IPXCP .
The following example shows the output of this command, with the ppp_ncp
parameter value highlighted.
Configuring IPX on the CPE router with Site Manager
You must also configure IPX on the CPE router on the home network. The
following steps describe how to use Site Manager to configure IPX on a Bay
Networks CPE router. If the CPE router is not a Bay Networks device, refer to the
manufacturer’s configuration instructions.
1.
From the Site Manager window, use the Tools menu to select
Configuration Manager in dynamic mode.
The path is Site Manager > Tools > Configuration Manager > Dynamic.
2.
Click the interface on which you want to add the IPX information.
The Edit Connector window appears.
admin: show port ppp
global port:
local address: 132.245.54.54 metric: 1
slip_ppp_security: Y net_inactivity: off
do_compression: N allow_compression: N
net_inactivity_units: minutes address origin: acp
ppp_mru: 1500 ppp_acm: 0x0
ppp_security_protocol: pap ppp_username_remote: ”“
ppp_password_remote: ”<unset>“ ppp_ncp: all
ppp_sec_auto: N mp_mrru: 1500
mp_endpoint_class: mac mp_endpoint_addresss: