manualshive.com logo in svg

Bay Networks 5391, Руководство по установке

Поделиться
Скачать
Bay Networks 5391 Скачать руководство пользователя страница 18

Installing Remote Annex Network Software for Windows

Chapter 1    Overview, Requirements, and Online Help

1-4

Table 1-2. Workstation Hardware and Software Requirements (continued)

Annexes

Quick2Config Annex supports Remote Annexes 6300 and 5393 running
Release 13.3 or later, Remote Annexes 2000, 4000, 5390, 5391 and 6100
running version 11.2 or later, and Communications Server Release 10.0.

IP Stack Software

The computer that runs Quick2Config Annex must also run network
communications software (an IP stack software package). This software
is included with Windows NT and Windows 95. Quick2Config Annex
checks your hard drive during installation for a compatible IP stack.

You cannot operate two IP stacks at the same time. If you want to
install NetManage Chameleon 4.6 that came with Quick2Config
Annex (Windows and Windows for Workgroups) or the Microsoft
TCP/IP stack (Windows 95 and Windows NT), first disable any
existing IP stack.

Workstation Hardware/
Software

Requirements

Operating systems

Windows NT Server 3.51 or 4.0

Windows NT Workstation 3.51 or 4.0

Windows 95

MS-DOS 6.0 or later (Version 6.2
recommended) with Microsoft Windows 3.1
(running Win32s 3.10 or later) and Windows for
Workgroups 3.11 (running Win32s 3.10 or later)

CD-ROM drive

Quick2Config Annex and NA software (for
Windows 95 and Windows NT) are supplied on
CD-ROM

Содержание 5391



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды