manualshive.com logo in svg

Bay Networks 5391, Руководство пользователя

Поделиться
Скачать
Bay Networks 5391 Скачать руководство пользователя страница 2

4401 Great America Parkway

8 Federal Street

Santa Clara, CA 95054

Billerica, MA 01821

Managing Remote Access Concentrators Using Annex Manager

ii

Copyright © 1997 Bay Networks, Inc.

All rights reserved. Printed in the USA. September 1997.

The information in this document is subject to change without notice. The
statements, configurations, technical data, and recommendations in this document
are believed to be accurate and reliable, but are presented without express or
implied warranty. Users must take full responsibility for their applications of any
products specified in this document. The information in this document is
proprietary to Bay Networks, Inc.

The software described in this document is furnished under a license agreement
and may only be used in accordance with the terms of that license. A summary of
the Software License is included in this document.

Trademarks

Bay Networks is a registered trademark and Remote Annex, BayStack,
Quick2Config, System 5000, Bay Networks Press, and the Bay Networks logo are
trademarks of Bay Networks, Inc.

Microsoft, MS, MS-DOS, Win32, Windows, and Windows NT are registered
trademarks of Microsoft Corporation.

All other trademarks and registered trademarks are the property of their respective
owners.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability,
Bay Networks, Inc. reserves the right to make changes to the products described in
this document without notice.

Bay Networks, Inc. does not assume any liability that may occur due to the use or
application of the product(s) or circuit layout(s) described herein.

Portions of the code in this software product are Copyright © 1988, Regents of the
University of California. All rights reserved. Redistribution and use in source and
binary forms of such portions are permitted, provided that the above copyright
notice and this paragraph are duplicated in all such forms and that any
documentation, advertising materials, and other materials related to such
distribution and use acknowledge that such portions of the software were
developed by the University of California, Berkeley. The name of the University
may not be used to endorse or promote products derived from such portions of the
software without specific prior written permission.

SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND
WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

In addition, the program and information contained herein are licensed only
pursuant to a license agreement that contains restrictions on use and disclosure
(that may incorporate by reference certain limitations and notices imposed by third
parties).

Содержание 5391
































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды