manualshive.com logo in svg

Bay Networks 5391, Руководство пользователя

Поделиться
Скачать
Bay Networks 5391 Скачать руководство пользователя страница 166

Managing Remote Access Concentrators Using Annex Manager

Chapter 7    Configuring RAC Parameters

7-18

The

Comparison Output

 box reports the differences in parameter

values between the RACs and scripts you select. If parameter
values differ, or if a parameter name does not exist, the box displays
the parameter information. The

Comparison Output

 box format

depends on the option you choose.

Table 7-1

 describes these

formats.

Table 7-1. Comparison Output Box Information

The

Compare

 process considers the wild card indicator (an asterisk

(*)) as a special port number. If you select

Script vs. Script

 and the two

scripts have the same parameter but one uses a wild card, the
parameter appears in the output box.

4.

Choose a RAC from each

Annex List

 box that displays.

If your list has one RAC, you do not need to select it. If you want
to compare two ports on the same RAC, select the same RAC in
both list boxes.

5.

Select one port type and a port number for each Annex List.

If you selected the

Annex vs. Annex

 option, you must select a port

type that matches the parameters you selected. For all other

Compare Options

, you can select only the appropriate port type. If

If values differ and
you select:

The Output Box includes:

RAC vs. RAC

Parameter name followed by each RAC
name, port number (if necessary), and the
parameter value.

RAC vs. Script

Parameter name followed by the RAC
name and value, and the file name and
value.

Script vs. Script

Parameter name followed by each script
name. Parameter values appear if a
parameter exists in both scripts but values
are different.  If a parameter exists in one
script but not in the other, the box lists the
parameter name and explains which script
stores the parameter.

Содержание 5391
































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды