Bay Networks 5000, Руководство по установке

Страница: 28 / 43

Installing Remote Access Concentrator Software for UNIX
Chapter 2 Installing the Software
2-12
**************************************************
*** Done ***
**************************************************
Installing Annex Manager
At this point the main software installation is complete. However, the
script prompts you to install Annex Manager. You can install immediately
before or after installing the RAC software, or during a separate
installation script session.
The installation script requires several decisions such as naming a
directory for the utility, identifying ownership and users, and determining
whether to merge data from previous Annex Manager versions. In
addition to running the script, installing the utility involves setting some
environment variables and specifying permissions.
1. At the following prompt press Return to install Annex Manager.
Do you wish to install the Annex Manager? (y/n/q=quit)
[y]:
For the installation to proceed, we must copy software
to a directory on a hard disk on the host. Please enter
the name of the directory to be used.
Enter the name of the Annex Manager installation
directory.
Directory name: [/usr/annex/gui_am_R3.1]:
2. If you choose to accept the default, press Return; otherwise
enter a pathname.
If you have not yet defined the GUI_AM_DIR variable to the
default directory, exit the script to the UNIX prompt and issue
the proper command before installing Annex Manager. See
Environment Variables on page 3-1 for command syntax.
If you are installing Annex Manager by itself, you must invoke
the installation script from the media as described in
Loading
the Installation Script on page 2-1 .