Bay Networks 5000, Руководство по установке

Страница: 16 / 43

Installing Remote Access Concentrator Software for UNIX
Chapter 1 Before You Begin
1-4
Table A-3
lists the operating system versions supported by the software
and indicates whether binary files are provided on the distribution media.
Loading and building an image on an unsupported platform is allowed
so that you can build on a system that has access to the distribution media
and then move the newly compiled files to the actual host.
After making your selection, the script begins loading and, if necessary,
compiling. The script saves output from the compilation to the file
Build.out in the working directory in case you have to troubleshoot the
installation.
Annex Manager
Annex Manager runs on most UNIX systems. Software requirements for
specific systems are listed in
Table A-4
. A color monitor or X-terminal is
recommended, although you can use Annex Manager with a monochrome
X-terminal.
Use the following command at the UNIX prompt before loading the
install script:
setenv GUI_AM_DIR < install directory>
The default installation directory usually includes the software version
number in the directory name (for example, in this release the default
directory is GUI_AMR3.1). You must execute this command any time
you change the path of the Annex Manager directory.
Before installing Annex Manager for the first time, you must
define the GUI_AM_DIR variable to a valid directory, or the
Annex Manager installation will fail. (See below command.)