Bay Networks 5000, Руководство по установке

Страница: 15 / 43

1-3
Chapter 1 Before You Begin
Installing Remote Access Concentrator Software for UNIX
• When the script requires your input, the prompt includes a
default selection shown in brackets. You can accept the default
by pressing the Return key (or the esc key on PC keyboards).
• You can pause the script at any prompt by entering an
exclamation mark (!). This allows you to perform other
functions such as checking directory capacity. You can return to
the script by typing exit.
• The script also provides help text, which you can retrieve at any
prompt by entering a question mark (?).
About the Installation Script
When you start the installation, you copy the installation script from the
media to a directory on the RAC host. When you invoke the script, it
detects the host system machine type and operating system version. Based
on this information and on options you choose, the script extracts only
selected files from the media.
If your platform is supported (see
Table A-2
) the installation script allows
you to load both the software and Annex Manager in the same session,
or in different sessions. The install script (and extracted files) can be
stored on the host system hard drive for reinstallation.
Binary Files
The distribution media contains binary files for most supported platforms.
When the script detects binary files for the host operating system, it
provides the option of installing the binary files or loading the source
code and compiling the software at a later time. See
Table A-3
for binary
and source code options.
Source Code
If there are no binary files available, the script loads the source code and
uses an available compiler on the host system to build the image. If the
script cannot identify a compiler on your system, it ends the installation
session.