User’s Guide
Counting scale
Model
DSC30
16
ES
FR
ENG
TARE
Put the package on the scale and press
to return to zero, its weight can be eliminated, if there is a signal of
, it indicates that the
weight has been deducted. After removing all items and package form the scale, if there is a display of weight of package in a negative
number on the weight space, press the key
and
and the weight will run back to zero.
NUMBER SET
Put samples of the products on the scale. The weight screen will show the weight. Press numeral key to input sample number and the
unit weight will display this number.
If press incorrectly, you can press
and input again. Press
to confirm and the unit weight will be automatically be computed.
Now the unit weight screen shows samples’s unit weight and the total quantity display screen shows the sample’s quantity. Then you
can sart counting now.
UNIT WEIGHT SET
Counting
When counting, if you already know the unit weigh of the product, you can press the numeral key to input tje unit weight directly. Then
the unit weight scrren will show the figure. And when you put the product on the scale, the total quantity screen will display the prduct’s
total quantity.
TARE PRESETTING
If you already know the tare of the product, then after pressing
input the tare and press
again for confirmation. At this point, the
weight screen will show the presetted unit weight. And automatically the weighed product has already been tared. You can also press
clear the presetted tare.
ACCUMULATION
In weighing and couting mode, press
to accumulate weight and total quantity. The weight screen displays accumulated weigh; the
unit weight screen displays accumulated number; and the total quantity screen displays accumulated total numbers. You can accumu-
late the next number after taking the accumulated product off and the screen back to zero.
Press
to see the accumulated records and press it once again back to the normal weighing and numbering mode. Under the state
of accumulating display, you can press
to clear all the accumulated records.
WARMING PRESETTING
When counting, if you want to set the upper and lower limit, press the
key, then the weight screen will show the upper limit informa-
tion “-H1-”. Press the numeral key to input the upper limit value and display it in the unit weight screen. Then press
again to confirm
and go into the lower limit set. The weight screen shows the lower set information “-Lo-”. And press the numeral key to input the lower
limit value and display it in the total quantity screen. Then press
to confirm and back to the weighing and counting mode. When
counting, suppose the quantity of the product is between the upper and the lower limit, buzzer will buzz to alarm.
AUTO-AVERAGING OPERATION
1. Press and hold
before turning the scale on, set the auto-averaging into “0” (“0” stands for allowing auto-averaging, “1” stands
for forbidding auto-averaging.)
2. Put samples of the products on the scale for sampling. In the process of counting, if the additional quantity is less than sampling
quantity, the scale will auto-averaging with buzzing. Otherwise, the scale will terminate auto-averaging.
3. Only when sampling finished, can auto-averaging workable.
CALIBRATION
In the weighing and counting mode, press and hold
until the total quantity screen shows the single-point calibration information
“CAL" and the unit weight shows the weight needs calibration. If you need to change the calibrated weight value, you can press the
numeral key to input new calibrated weight value and display it in the unit weight screen. If you inout incorrectly, you can press
to
clear it and input again. Put the corresponding weight and display it in the weight screen. After it’s steady, it will automatically calibrate
and back out from calibration mode.
UNIT SELECTION
Press de
for 5 seconds, then press
to choose the desire unit such as g, kg, lb. Press the
again back to the counting mode,
the set unit will be automatically stored when turning the machine on next time.
