17
7.0
Arranging the Coals – Page 17
7.3 Arranging the Loose Coals
NOTE: Due care and attention to these instructions
should be taken when positioning the loose coals. Do
not allow the coals to drop in the gap between the
front and rear coal mouldings.
1. Take 2 coals and place on the outer edges of the front
coal moulding (Fig. 26).
2. Take 4 coals and place as shown in Fig. 27 bridging the
front coal moulding and the rear coal moulding, ensure and
flat faces on these coals face downward. Care should be
taken as not to allow any coals to drop down between the
front and rear coal mouldings (Fig. 27).
3. Take the 5 remaining coals and place as shown in Fig.
28 positioned in the gaps created by the front, rear coal
mouldings and loose coals
NOTE: Ensure no coals fall down the back of the fire,
this could damage or interfere with the illumination
effect.
