background image

6.0 Setting the DHW Times

10

© Baxi Heating UK Ltd 2011

6.1

Programming the Domestic Hot Water Times (cont)

11:00

Mon - Sun: 2nd Time ON

Time  hot water

Press the Selector Button and
the ‘2nd Time ON’ time will
flash. Turn the Selector Button
to the required time. Press
Button to select.

11:30

Mon - Sun: 2nd Time ON

Time  hot water

Turn the Selector Button one
click clockwise. 

13:30

Mon - Sun: 2nd Time OFF

Time  hot water

15:00

Mon - Sun: 3rd Time ON

Time  hot water

Turn the Selector Button one
click clockwise. 

Turn the Selector Button one
click clockwise and then press
the Selector Button. The ‘2nd
Time OFF’ time will flash. Turn
the Button to the required
time. Press the Button to select.

17:00

Mon - Sun: 3rd Time ON

Time  hot water

19:30

Mon - Sun: 3rd Time OFF

Time  hot water

Turn the Selector Button one
click clockwise and then press
the Selector Button. The ‘3rd
Time OFF’ time will flash. Turn
the Button to the required
time. Press the Button to
select.

Press the Selector Button and
the ‘3rd Time ON’ time will
flash. Turn the Selector Button
to the required time. Press
Button to select.

STEP 11

STEP 12

STEP 13

STEP 14

STEP 15

STEP 16

Menu Button

04.   November     2008              08:50
Tuesday

Display Screen

06:30

Mon - Sun: 1st Time ON

Time  hot water

Press the Selector Button and
the ‘1st Time ON’ time will
flash. Turn the Selector
Button to the required time.
Press Button to select.

08:30

Mon - Sun: 1st Time OFF

Time  hot water

Turn the Selector Button one
click clockwise and then press
the Selector Button. The ‘1st
Time OFF’ time will flash. Turn
the Button to the required
time. Press the Button to
select.

STEP 9

STEP 10

If  --:--  appears when adjusting the ON/OFF Time it is
because the ON is the same as OFF.

If this is selected the

Time period will disappear. A new Time period can be
introduced by starting from 24.00 and 

turning anticlockwise.

Selector Button 

i-THINK Controller

Easy Menu Button

03.   June     2009                     11:30
Wednesday

Press the MENU button
twice to return to normal
display screen.

STEP 17

Содержание Ecogen 24

























Отзывы: