Baxi Boston 2 40 RS, Инструкции по установке и обслуживанию

Страница: 2 / 14

Installation Instructions – page 2
Natural Gas INTRODUCTION
Baxi Boston 2 80 RS
G.C.Nº. 41 077 89
Baxi Boston 2 70 RS
G.C.Nº. 41 077 88
Baxi Boston 2 60 RS
G.C.Nº. 41 077 87
Baxi Boston 2 50 RS
G.C.Nº. 41 077 86
Baxi Boston 2 40 RS
G.C.Nº. 41 077 85
Baxi UK Limited is one of the leading manufacturers of
domestic heating products in the UK.
Our first priority is to give a high quality service to our
customers. Quality is built into every Baxi product -products
which fulfil the demands and needs of customers, offering
choice, efficiency and reliability.
To keep ahead of changing trends, we have made a
commitment to develop new ideas using the latest
technology - with the aim of continuing to make the products
that customers want to buy.
Baxi is also the largest manufacturing partnership in the
country. Everyone who works at the company has a
commitment to quality because, as shareholders, we know
that satisfied customers mean continued success.
We hope you get a satisfactory service from Baxi. If not,
please let us know.
The Boston 2 RS is a range of Floor Standing Room Sealed
Boilers. There is a choice of outputs listed below:
The boilers share a common outer case within which there is
adequate space to fit a central heating pump using standard
fittings. An under work surface top panel is supplied with the
boiler to enable the unit to be fitted under a work top. The
pump cannot be fitted in the case in this type of application
(See PUMP).
All appliances are designed for use on Gas Type G20
(Natural Gas) only, at supply pressure 20 mb.
Each appliance consists essentially of three components,
namely:
1. COMBUSTION CHAMBER with heat exchanger, burner,
controls and inlet of air duct.
2. OUTER CASE.
3. BALANCED FLUE TERMINAL.
“Benchmark” Log Book
As part of the industry-wide “Benchmark” initiative all Baxi
boilers now include an Installation, Commissioning and
Service Record Log Book. Please read the Log Book
carefully and complete all sections relevant to the
appliance and installation. These include sections on the
type of controls employed, flushing the system, burner
operating pressure etc. The details of the Log Book will be
required in the event of any warranty work. Also, there is a
section to be completed at each subsequent regular
service visit.
The boilers listed below meet requirements of Statutory
Instrument ‘The Boiler (Efficiency) Regulations 1993 No
3083’ and therefore are deemed to meet the requirements of
Directive 92/42/EEc on the efficiency requirements for new
hot water boilers fired with liquid or gaseous fuels.
Boston 2 - 80 RS - G.C.Nº 41 07789
Boston 2 -70 RS - G.C.Nº 41 07788
Boston 2 - 60 RS - G.C.Nº 41 077 87
Boston 2 - 50 RS - G.C.Nº 41 07786
Boston 2 - 40 RS - G.C.Nº 41 07785
Type test for the purposes of Regulation 5 certified by:
NOTIFIED BODY 0086
Baxi is a BS-EN ISO 9001
Accredited Company Product/production certified by:
NOTIFIED BODY 0086