34
11.0
Changing Components - Page 33
11.5 Electrode
(Fig. 65)
1. Disconnect the electrode lead from the tag at the base of
the electrode.
2. Undo the screw retaining the electrode to the burner tray
and withdraw.
3. Fit the new electrode and re-assemble in reverse order.
Check that the spark gap is between 2.5mm and 4.0mm.
11.6 Thermocouple
1. Remove the burner as described in section 11.3.
2. Undo and remove the locknut holding the thermocouple
to the burner tray (Fig. 66).
3. Undo the thermocouple nut from the rear of the gas valve
(Fig. 67) and remove the thermocouple from the burner tray.
4. Carefully bend the new thermocouple to the shape of the
original and reassemble in reverse order of dismantling.
Содержание Belmont 2
Страница 7: ...7 ...
Страница 11: ...11 4 0 Electrical Page 10 4 2 Schematic Wiring Diagram ...
