1.0 Warnings
3
1.1
Safe Installation
1. The installation must be carried out by a CORGI
Registered Installer or other registered competent
person and be in accordance with the relevant
requirements of the current
G
AS
S
AFETY
(Installation and Use)
R
EGULATIONS
, the
B
UILDING
R
EGULATIONS
(Scotland)(Consolidation), the
L
OCAL
B
UILDING
R
EGULATIONS
, the current
I.E.E. W
IRING
R
EGULATIONS
and the bye laws of the
L
OCAL
W
ATER
U
NDERTAKING
. Where no specific instruction is
given reference should be made to the relevant
BRITISH STANDARD CODES OF PRACTICE
.
For Ireland install in accordance with IS 813
“I
NSTALLATION OF
G
AS
A
PPLIANCES
”. Reference
should also be made to
B
RITISH
G
AS
G
UIDANCE
N
OTES
F
OR
T
HE
I
NSTALLATION OF
D
OMESTIC
G
AS
C
ONDENSING
B
OILERS
.
2.
This appliance must be installed in accordance
with the manufacturer’s instructions and the rules
in force, and only used in a suitably ventilated
location.
3.
Read the instructions before installing or using
this appliance.
4. Any purpose provided ventilation should be
checked periodically to ensure that it is free from
obstruction.
IMPORTANT
- The addition of anything that
may interfere with the normal operation of the
appliance without the express written
permission of Baxi UK Limited could invalidate
the appliance warranty and infringe the
G
AS
S
AFETY
(Installation and Use)
R
EGULATIONS
.
1.2
In case of gas leaks
1.
If a gas leak is found or suspected,
turn off the
gas supply at the meter immediately and at the
isolating valve on the boiler if possible. Contact your
Installer or Transco (under 'Gas' in the phone
directory).
Do not operate any electrical equipment
or light switches.
1.3
Servicing your Appliance
1. For reasons of safety and economy your appliance
should be serviced annually. Your Installer or British
Gas Service will be able to advise you.
1.4
Electricity Supply
1.
THIS APPLIANCE MUST BE EARTHED.
2. A standard 230V ~ 50Hz supply is required. The
appliance must be protected by a 3 amp fuse.
Never Hang Flammable Items Over
The Appliance
B.S. Codes of Practice
Standard
Scope
BS 6891
Gas Installation.
BS 5546
Installation of hot water supplies for
domestic purposes.
BS 5449 Part 1
Forced circulation hot water systems.
BS 6798
Installation of gas fired hot water boilers.
BS 5440 Part 1
Flues.
BS 5440 Part 2
Ventilation.
BS 7074
Expansion vessels and ancillary
equipment for sealed water systems.
BS 7593
Treatment of water in domestic hot water
central heating systems.
“Benchmark” Installation, Commissioning and Service Record
Log Book
Please ensure that your installer has completed the Installation and
Commissioning sections of the Log Book and hands the Log Book over.
The details of the Log Book will be required in the event of any warranty
work. Keep the Log Book in a safe place and ensure that the relevant
sections are completed at each subsequent regular service visit.
All CORGI registered installers carry a CORGI identification card
and have a registration number. Both should be recorded in your
boiler Log Book. You can check your installer is registered by
telephoning 01256 372300 or writing to:-
1 Elmwood,
Chineham Business Park,
Crockford Lane,
Basingstoke.
RG24 8WG.
