Install the 11 loose coals as follows. The underside of each coal is marked with a letter 'A' to 'K' and an arrow.
4.
The coals should be positioned so that the arrows always point towards the back of the firebox. When
located into position the stem of each arrow should be at 90° to the rear of the fireplace opening (See
figure
11
).
Figure 11. Front row "Coal A"
5.
Hold coal 'A' upright with the arrow pointing to the top. Locate coal 'A' as shown in
figure 11
.
Locate coals 'B' to 'E' so that they are firmly seated in the valleys in the coal base and front coal.
6.
Hold coal 'B' upright with the arrow pointing to the top. Locate coal 'B' as shown in
figure 12
.
Figure 12. Second row "Coal B"
7.
Hold coal 'C' upright with the arrow pointing to the top. Locate coal 'C' as shown in
figure 13
.
Page 16 of 25
20/08/2012
http://www.partsarena.com/baxi/System/DATA/Dx/DS1/installation/2642/I39-2642/I...
