Removing the fascia
Decadent, Eternal, Obsession and Victorian heaters.
1.
Remove the two fascia securing screws (See figure 2).
Remove the front fascia by gently pulling the base of the
fascia forward whilst lifting clear of the support brackets at
the top of the heater (See figure 2).
2.
Keep the fascia in a safe place while installing the heater
Adage, Anthem, Capri, Coast, Flare, Prelude and Style
heaters.
1.
Very strong magnets attach the
fascia to the heater. Support the
rear of the heater and gently pull
the fascia forward (See figure 3).
2.
Keep the fascia in a safe place
while installing the heater.
Bolero, Carma and Dream
heaters.
The fascia is supplied in separate
packaging within the main box.
Fascia support brackets.
Bolero, Carma and Dream
models only.
As supplied the fascia support
brackets may be flat against the
heater body. Using a suitable tool
or gloved hand bend the brackets
as in figure 4.
Page 8
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 4.
Figure 3. Removal of
Adage, Fusion and
Prelude fascia (Fascia
may differ from that
shown).
Figure 2. Removing
Decadent, Eternal,
Obsession and
Victorian fascia (Fascia
may differ from that
shown).
