are four ‘mirror’ screws. These have a countersunk head that has a threaded hole in the
centre. Secure the glass panel in place with the four ‘mirror’ screws supplied
.
Important - Do not over tighten the screws. The screws only need to be tightened
sufficiently to retain the glass
panel. Excess pressure may
cause the glass panel to
break.
12.
Supplied with the trim pack
are four head covers for the
‘mirror’ screws. Locate these by
placing onto the heads of the
‘mirror’ screws and turning
clockwise.
Important:
The spacers
provided with the trim
pack must always be
fitted. Never reduce the
depth of the spacers in
any way. Always replace
the spacers with authorised spares (See figure 31).
Page 29
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 31 Spacer gap
Figure 30 Fitting sequence