Lighting with a match or taper
Manual ignition:
Depress the control knob
and turn anticlockwise towards the 1/IGN
position.
Electronic ignition:
Depress the control knob
slightly and turn anticlockwise towards the
1/IGN position.
While keeping the knob depressed, light the
pilot by inserting a long match or taper into
the opening as in figure 3.
When the pilot is alight, keep the knob
depressed for about ten seconds to allow the
flame sensing probe to warm up before setting
to your preferred heat level.
For your own convenience, have the heater
serviced as soon as possible.
CLEANING YOUR FIRE
Turn the fire off and allow it to cool before attempting any cleaning.
Normally the fire will only need dusting. The bright metal trims may be cleaned with a
damp cloth and dried with a soft duster. Obstinate marks can be removed from the guard
and trims using soapy water.
Never use abrasive cleaners.
The radiants can be cleaned with a soft brush - see the following section for removing
the radiants.
Page 8
OWNER GUIDE
Figure 3.
