HBZMXSIB/10/16SD-PR-1
Page 22
3.2 Using The Menu System
Your multiplexer provides user-friendly, on-screen menus for setting up the system.
As an alternative to on-screen programming in the menus, the options can be
downloaded via the RS-232 port from a central controller or PC. The protocols for
this are given in Appendix A.
To enter the menu system, press the MENU key
and enter the 3-key password.
The password is set to password 1 in the front of this manual when the unit is
shipped. You should change the password (using the menu system) and remove the
password page from the front of this manual to prevent unauthorised use of the menu
system.
Caution: Simplex Units
The menu operation will
stop RECORD mode on simplex units if the
password is correctly entered. Ensure that it is appropriate to
stop all
recording before entering the password.
The MAIN menu bar will appear once the correct password has been entered.
Navigating The Menu System
You have three menu levels, designed in such a way as to make it very easy to
navigate around the menu choices. The best way to understand the menu system is
to use it, with this manual handy for reference.
In general, the ENTER key is used to go to the next level of menu, and the MENU
key
is used to ‘escape’ to the previous level of the menus without making any
changes.
You have access to the following menu levels:
Main Menu Level
This is a list of all sub-menus, each of which you can access. The sub-menus are
arranged into logical menu sections. To access a sub-menu from the Main menu, use
the arrow keys
to select the desired section and then press the ENTER key .
Pull-down Menus
Pull-down menus are the first sub-menu level. If additional choices are available in
that sub-menu, typically these are made in Pop-up menus. Pull-down menus can be
exited either by selecting Exit and then pressing the ENTER key , or by pressing the
MENU key
.
Main
Quick-Setup
Содержание ZMX/BD/10
