Bavono BVS8016-A Скачать руководство пользователя страница 26

Страница: 26 / 66

DVR User Manual

Fig 4-15 Schedule-Week Schedule

4.4.2 Motion Schedule

This tab allows to set schedule for motion based recording. The setting steps are as follows:

Step 1

: Enter into Menu



Setup



Schedule



Motion tab.

Step 2

: The setup steps for schedule for motion based recording are similar to normal schedule

setup. You can refer to 4.4.1 Schedule for details.

Note:

The default schedule of motion based recording is 24

ⅹ

7. If you want to activate

motion based recording, you must enable motion alarm and setup schedule for motion
alarm (see Chapter 4.5.2 Motion Alarm for more details).

4.4.3 Sensor Schedule

This tab allows to set schedule for sensor based recording. The setting steps are as follows:

Step 1

: Enter into Menu



Setup



Schedule



Sensor interface.

Step 2

: The setup steps for schedule for sensor based recording are similar to normal schedule

setup (see Chapter 4.4.1 Schedule for details).

Note:

The default schedule of sensor based recording is 24

ⅹ

7. If you want to activate

sensor based recording, you must enable sensor alarm and setup schedule for sensor
alarm (see Chapter 4.5.1 Sensor Alarm for more details).

4.5 Alarm Configuration

Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and
alarm out.

4.5.1 Sensor Alarm

Sensor includes three sub menus: basic, alarm handling and schedule.
Operate the following steps to configure sensor alarm:

Step 1

: Enter into Menu



Setup



Alarm



Sensor



Basic interface. Refer to Fig 4-16:

Содержание BVS8016-A


































































Результаты поиска

Содержание BVS8016-A

Отзывы:

Bavono BVS8016-A, Руководство пользователя, Страница: 26 / 66

Результаты поиска

Содержание BVS8016-A

Отзывы: