Bavono BVS8016-A, Руководство пользователя, Страница: 23 / 66

DVR User Manual
18
Fig 4-11 Record Configuration-Record Bitrate
4.3.3 Time
Step 1 : Enter into Menu

Setup

Record

Time interface to set recording time. Refer to Fig
4-12:
Fig 4-12 Record Configuration-Time
Step 2 : Set Pre-alarm record time and post-alarm record time. Select “All” to set the same
settings for all channels.
Pre-alarm Record Time: Set the time in seconds to pre-record before the actual recording
begins.
Post-alarm Record Time: Set the time in seconds to post-record after the actual recording
has finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Parameter Meaning
Rate
Range from: 1-30
（
NTSC
）
1-25(PAL)
Resolution Supports 720P.
Quality
The higher the value is, the clearer the recorded image is. Six
options: lowest, lower, low, medium, higher and highest.
Encode VBR and CBR
Max bit stream You shall adjust it subject to the actual network condition