Bavaria Vision 46, Руководство пользователя

Страница: 70 / 86

Owner‘s manual
70
8.17. Grounding
Caution - in case of grounding
» Never obstruct exits and escape routes!
» Check for leaks on the entire hull, first at bilge level, the keel and the rudder shafts and in
particular at those places where hull fittings and openings have been fitted (Propulsion, sea
cocks etc.).
» Return to port immediately and drive at reduced speed, reduce sail area, avoid vivid dynamic
movements and accelerations
» Check the appendages and openings and structure again when returning to port
» Have the boat inspected on the dry thoroughly
8.18. List of through Hull Fittings (locations see drawing)
The following skin fittings are fitted in the hull of the craft. They provide the frontline defense against flooding and
should be regularly inspected for their condition. Valves should be frequently operated to ensure free movement.
It is recommended that all valves but drains & bilge discharges are closed when the craft is left unattended.
Pos. Description Pos. Description
1 Intake fushing water toilet 21 Drain anchor chain locker
2 Deck suction black water 22 Filler fitting fresh water
3 Discharge black water tank 23 Filler fitting diesel
4 Vent black water tank 24 Intake sea water A/C
5 Vent fresh water tank 25 Intake cooling engine saildrive
6 Discharge sink 26 Log/echosounder
7 Discharge head/shower 28 Discharge sump conpanionway
8 Discharge sump of galley sink 29 Vent diesel tank
10 Discharge el. bilge pump 30 Discharge stb steering position
11 Discharge A/C fwd cabin 31 Discharge steering port, transom
12 Intake generator cooling 32 Exhaust engine
14 Discharge heater 33 Exhaust generator
17 Discharge manual bilge pump 34 Disharge sump A/C aft
18 Drain rudder upper bearing stb/port
19 Drain gas box