Bavaria 45.135.82, Оригинальная инструкция по эксплуатации

Страница: 10 / 12

7.8 Screwdriving
We recommend using self-centering screws (e.g. Torx
screws, recessed head screws) designed for reliable
working. Be sure to use a bit that matches the screw in
shape and size. Set the torque as per Section 7.2 of the
user guide.
7.9 Selecting 1st gear or 2nd gear (Fig. 4)
By adjusting the selector switch (6), you can work with a
faster or slower turning speed. Change the gear only
when the drill is at a standstill. If you fail to observe this
point, the gearing may be damaged.
7.10 LED lamp (Fig. 2)
The LED lamp (11) can be used in poor lighting
conditions to illuminate the area where you want to
drill or screw. The LED lamp (11) will be lit automatically
as soon as you press the ON/OFF switch (Fig. 1/Item 3).
8. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before starting
any cleaning work.
8.1 Cleaning
Keep all safety devices, air vents and the motor housing
free of dirt and dust as far as possible. Wipe the tool
with a clean cloth or blow it with compressed air at low
pressure.
We recommend that you clean the tool immediately each
time you have finished using it. Clean the tool regularly
with a moist cloth and some soft soap. Do not use
cleaning agents or solvents; these could attack the plastic
parts of the tool. Ensure that no water can seep
into the tool.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering Spare Parts
Contact our After Sales Support on 1300 922 271 and
quote the following data when ordering replacement
parts:
• Type of machine
• Article number of the machine
• Identification number of the machine
• Replacement part number of the part required
9. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste.
10. Disposal of batteries
Batteries contain substances that can be harmful to the
environment. Never place batteries in your household
refuse, in fire or in water. Batteries should
be collected, recycled or disposed of in an
environmentally friendly way. Seek advice on correct
disposal from local waste authorities or your local council.
10