Bavaria 42 CRUISER, Руководство по эксплуатации

Страница: 18 / 43

Sailing Yacht Bavaria 42 Cruiser Bavaria Yachtbau GmbH
18 of 43
2. Installations and circuits
2.1 Tanks and piping – water
2.1.1 Fresh water, drinking water –cold
The yacht has two water tanks with a capacity of altogether about 360 l. Fresh water is supplied via
a water inlet (with a blue cover) at the transom, port side and on the forecastle near the chain
locker. You can take water from the tank over a hose connection leading to the pressure water-
pump.
This pump, realising the complete cold water circulation, is fitted below the pantry. An interruption
of the operation of the pressure pump is done by cutting off all ducts. All pipes/hoses should be
checked for leaks if the pump continuous working though all ducts were cut off properly.
The pump is protected by a filter which should be regularly checked and cleaned if necessary.
Components:
1 Deck plate (inlet) Einfüllstutzen
2
Tank ventilation Tankentlüftung
3
Water heater Boiler
4
Backflow of water heater Rückfluss Boiler
5 2 – way valve 2-Wegehahn
6 Fresh water pump Frischwasserpumpe
7 Accumulator tank and pressure switch Druckgefäß und Druckschalter
8 Deck plate (inlet) Einfüllstutzen
9 Tank venting Tankentlüftung
10 Engine circulation Motorkreislauf
11 Draining water heater Entleerung Boiler
12
Shower Cockpitdusche
Note
Exchange the water in tank from time to time.
Additionally you should use common purifiers.